Ham Radio Networking (was Re: Rogers Canada using 7.0.0.0/8 for internal address space)

Jack Carrozzo jack at crepinc.com
Thu May 26 15:03:13 UTC 2011


Nope, mostly HF (under 30mhz) gear at 300baud. Yes, you read that right.
I've seen a couple shorter hops of fractional T1 on 900mhz or 9600baud AX.25
on 144mhz, but there just aren't enough links to use line of site
frequencies.

Push mad bits,

-Jack Carrozzo

On Thu, May 26, 2011 at 10:34 AM, Christopher Pilkington <cjp at 0x1.net>wrote:

> On Thu, May 26, 2011 at 2:12 AM, Matthew Kaufman <matthew at matthew.at>
> wrote:
> > You just need to move up in frequency a bit. My slowest ham-band link
> runs at 12 Mbps and my fastest at over 100 Mbps.
> >
> > Good reminder that I should renumber the IPv4 portion of that network to
> somewhere in 44.0.0.0/8 however.
>
> What hardware/frequencies/technology are you using for these links?
> Repurposed commercial microwave gear?
>
> -cjp
>
>



More information about the NANOG mailing list