Juniper to Watchguard IPSEC

rhsv6 at rhsv6 at
Mon Sep 6 10:26:25 UTC 2010

You have not specified what sort of settings you are using (PSK vs 
CERTS, Algos , route based VPN etc)

However something along the following lines is working fine for me:

set ike gateway "**************" address Main outgoing-
interface "ethernet0/8" preshare "**************" proposal "pre-g2-
set vpn "**************" gateway "**************" replay tunnel 
idletime 0 proposal "g2-esp-aes128-sha" 
set vpn "**************" id 0x7 bind interface tunnel.40
set vpn "**************" proxy-id local-ip remote-ip "ANY" 

>Anyone have any experience with IPSEC between a WG Firebox and 
Juniper >SRX/SSG? Running into some problems and beginning to think 
there might be >some incompatibilities in their IPSEC options.

> TIA,

> Bryan

More information about the NANOG mailing list