<NAT translation from a sourced network to a destination network>

Mike Ruiz mruiz at lstfinancial.com
Fri Jun 18 20:13:08 UTC 2010


Ok here we go.  I know the subject is a little ambiguous, please allow to explain.

 

I have a network of 192.168.1.0/24 and I need it to reach a network 10.0.1.0/27 only when it needs to be accessed by specific machines that reside on the 192.168.1.0/24 network.  

 

 

192.168.1.10 à NAT à10.0.1.10 à route that packet to 10.0.1.1.  

 

I only want specific host to route to that specific /27 network .

 

Any help would be appreciated. So far what I have gathered is only for VPN connections but I do not want to build a VPN.  Thank you again in advance. 

 

 

Michael Ruiz

Network Engineer

 

"If you tell people where to go, but not how to get there, you'll be amazed at the results." -- General George S. Patton Jr.

 

 




More information about the NANOG mailing list