BGP question
Rens
rens at autempspourmoi.be
Thu Sep 17 04:49:37 UTC 2009
Hi all,
I'm having difficulties to understand why I am not advertising a certain
customer range to my upstream.
I can see this range in my BGP table 3 times.
show ip bgp customer_range
Number of BGP Routes matching display condition : 3
Status codes: s suppressed, d damped, h history, * valid, > best, i internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric
LocPrf Weight Path
*>i customer_range Local IX 110
0 XXXX YYYY i
* customer_range upstream provider 100
0 AAAA BBBB XXXX YYYY i
* customer_range my customer 0 120
0 YYYY YYYY i
Last update to IP routing table: 0h23m34s, 1 path(s) installed:
Route is not advertised to any peers
customer_range = each time the same /24
But it seems to choose the set the one as local IX as best.
When I disable local IX it sets the one with my upstream provider as best.
Shouldn't it set the customer_range I receive from my customer as best since
it's highest local pref and advertise it to my upstream provider peer?
Regards,
Rens
More information about the NANOG
mailing list