<Keepalives are temporarily in throttle due to closed TCP window>
Richard A Steenbergen
ras at e-gerbil.net
Tue Sep 15 19:54:26 UTC 2009
On Tue, Sep 15, 2009 at 12:28:02PM -0500, Michael Ruiz wrote:
> Here is more of the configuration to do with TCP information.
>
> ip tcp selective-ack
> ip tcp window-size 65535
> ip tcp synwait-time 10
> ip tcp path-mtu-discovery
Every time I turn those on (plus timestamping), it breaks something. The
last time I tried it broke ftp based transfers of new IOS, had to
disable or use tftp to get a non-corrupted image (SRA). The time before
that, it occasionally caused bgp keepalives to be missed and thus
dropped the session (SXF). It may work now, or there may be more subtle
Cisco bugs lurking, who knows. :)
You can confirm what MSS is actually being used in show ip bgp neighbor,
under the "max data segment" line. I believe in modern code there is a
way to turn on pmtud for all bgp neighbors (or individual ones) which
may or may not depend on the global ip tcp path-mtu-discovery setting. I
don't recall off the top of my head, but you should be able to confirm
what size messages you're actually trying to send. FWIW I've run
extensive tests on BGP with > 9000 byte MSS (though numbers that large
are completely irrelevent, since bgp's maximum message size is 4096
bytes) and never hit a problem. I once saw a bug where Cisco
miscalculated the MSS when doing tcp md5 (off by the number of bytes
that the tcp option would take, I forget which direction), but I'm sure
that's fixed now too. :)
--
Richard A Steenbergen <ras at e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
More information about the NANOG
mailing list