Wireless STM-1 link

Thu Sep 10 09:55:40 UTC 2009

All the interfaces are forced to 1Gbps and full duplex.

Maybe I should give some extra info.
All the traffic seems to pass ok via that link but I have seen that often
OSPF adjacencies go down/up , I suspect that the HELLO packets are being
dropped that pass via that link.

That's why I started to look a little deeper and do some ping tests.

-----Original Message-----
From: Adam Goodman [mailto:adam at wispring.com]
Sent: jeudi 10 septembre 2009 11:45
To: Rens
Cc: <nanog at nanog.org>
Subject: Re: Wireless STM-1 link

Sounds like this might be an Ethernet negotiaton problem

--------
Sent from my phone

On Sep 10, 2009, at 12:05 PM, "Rens" <rens at autempspourmoi.be> wrote:

> Hi all,
>
>
>
> I'm encountering a problem with a wireless STM-1 link which has a  
> switch
> connected at each end.
>
> The wireless link has Gigabit Ethernet interfaces and so have my  
> switches.
>
>
>
> When I ping between the 2 switches via that wireless link I'm  
> getting a lot
> of pings that are lost.
>
> The wireless link is not saturated but I'm thinking it could have to  
> do
> something with the gigabit interfaces and only having 155Mbps on the  
> link
> itself?
>
>
>
> All ideas welcome.
>
>
>
> Regards,
>
>
>
> Rens
>