L2 - L3 Etherchannel

Thu Apr 9 10:42:11 UTC 2009

Thanks guys.

-Amolak

On Thu, Apr 9, 2009 at 1:47 AM, Arie Vayner <arievayner at gmail.com> wrote:

> Yes.
>
>
> On Wed, Apr 8, 2009 at 9:03 PM, Amolak <amolak.singh at gmail.com> wrote:
>
>> Hi All,
>>
>> Is it possible to create L2 Etherchannel at one end and L3 etherchannel at
>> another end?
>>
>> For Example:
>>
>> SW-1
>> ====
>>
>> interface GigabitEthernet1/1
>>  channel-group 1 mode desirable
>>  channel-protocol pagp
>> !
>> interface GigabitEthernet1/2
>>  channel-group 1 mode desirable
>>  channel-protocol pagp
>> !
>> interface Port-channel 1
>>  no ip address
>>  switchport
>>  switchport access vlan 10
>>  switchport mode access
>> !
>> int vlan10
>>  ip address 1.1.1.1 255.255.255.252
>> !
>> ------------------------------------
>>
>> SW-2
>> ====
>>
>> interface Port-channel 2
>>  ip address 1.1.1.2 255.255.255.252
>> !
>> interface GigabitEthernet1/1
>>  no ip address
>>  channel-group 2 mode desirable
>>  channel-protocol pagp
>> !
>> interface GigabitEthernet1/2
>>  no ip address
>>  channel-group 2 mode desirable
>>  channel-protocol pagp
>> !
>>
>> I don't have a lab to test it, can somebody confirm if the connectivity
>> will
>> work between these devices as per this setup.
>>
>> Thanks,
>> Amolak
>>
>
>