Nipper and Cisco configuration results
Subba Rao
castellan2004-nsm at yahoo.com
Fri Apr 3 09:35:33 UTC 2009
I will check this as soon as I go to work this morning. One thing I noticed was about the Nipper results is that any router where SSH was disabled/Rlogin was enabled and vice versa.
I will go thru the configuration file once again.
Thank you very much for checking this out!
Subba Rao
--- On Thu, 4/2/09, Lee <ler762 at gmail.com> wrote:
From: Lee <ler762 at gmail.com>
Subject: Re: Nipper and Cisco configuration results
To: castellan2004-nsm at yahoo.com
Cc: nanog at nanog.org
Date: Thursday, April 2, 2009, 11:31 PM
On 4/2/09, Subba Rao <castellan2004-nsm at yahoo.com> wrote:
> I am using Nipper for verifying my Cisco configuration. Nipper is finding
> the "rlogin" service that is not in the configuration. I have searched the
> access lists and do not see it anywhere. The explanation by Nipper about
> this finding, "....Telnet protocol implemented by this service...." is
> confusing. Here is the Nipper's output:
<..snip ..>
> Can someone explain why Nipper is saying "Rlogin is enabled" when I do not
> see it in the configuration file? Is there something else that I need to be
> looking at?
I played with it a bit - removing the "transport input telnet" on a
vty line got me the rlogin service is enabled. Add it back & nipper
says it's disabled...
Do you have a "transport input telnet" on each vty? If not, does
adding it fix the nipper report?
Regards,
Lee
More information about the NANOG
mailing list