IPv6 on SOHO routers?
Matthew Moyle-Croft
mmc at internode.com.au
Thu Mar 13 23:13:20 UTC 2008
I have an 877m (no wireless):
Vlan1 has an ipv6 address and and ipv6 nd prefix.
All the devices plugged into the ethernet ports find out about IPv6 just
peachy.
"c870-advipservicesk9-mz.124-15.T1.bin"
(Caveat: I'm running native dual stack over PPPoE because I can make
the LNS do what I want)
MMC
Petri Helenius wrote:
> Michael K. Smith - Adhost wrote:
>>
>> It's not that bad. You can attach a v6 address to the 802.11
>> interface and the FastEthernet interface, but you can't put one on a
>> BVI which means you need two /64's if you want v6 on wireless and
>> wired.
> That workaround does not work on the models with the 4 port switch
> integrated. (running 12.4T)
>
> Pete
--
Matthew Moyle-Croft - Internode/Agile - Networks
Level 5, 150 Grenfell Street, Adelaide, SA 5000 Australia
Email: mmc at internode.com.au Web: http://www.on.net
Direct: +61-8-8228-2909 Mobile: +61-419-900-366
Reception: +61-8-8228-2999 Fax: +61-8-8235-6909
"The difficulty lies, not in the new ideas,
but in escaping from the old ones" - John Maynard Keynes
More information about the NANOG
mailing list