Hardware capture platforms

Juuso Lehtinen juuso.lehtinen at gmail.com
Thu Jul 31 08:16:02 CDT 2008


Second that.

Using hub to tap into a single link is also risky. I used to monitor single
FE link with 100M hub. After link had moderate utilization >20%, collision
led was lit all the time.

I've had good experience with VSS Monitoring Ethernet Aggregator taps. Also
Catalyst 2960 SPAN seems to work OK.

As for capture PC, we've been using regular PC with Wireshark. That's good
for single FE link, but has problem with GE and multiple links.

BR,
 Juuso

On Wed, Jul 30, 2008 at 4:26 PM, Leon Ward <seclists at rm-rf.co.uk> wrote:

>
> On 30 Jul 2008, at 03:26, James Pleger wrote:
>
>>
>> Something you might want to look into is traffic aggregation with a
>> switch or hub. You can buy an Allied Telesyn switch and basically turn
>> it into a hub by disabling switchport learning. Just an idea.
>>
>
> Never try to aggregate multiple TAPs with a hub.
> You will just create a bucket load of collisions and end up with a useless
> data feed presented to your monitoring tool. If you want to aggregate
> multiple TAP feeds into a smaller number of devices(s), most of the TAP
> vendors make some form of link aggregation device.
>
> Or, depending on the OS and sniffer you use, you may be able to bond the
> interfaces on the capture device.
>
> -Leon
>
>
>
>
>> You can use regular old tcpdump with the -C option to rotate logs
>>
>> tcpdump -i blah -s0 -C <filesize to rotate>, etc.
>>
>> or you can use Daemonlogger which does pretty much the same thing...
>>
>> http://www.snort.org/users/roesch/Site/Daemonlogger/Daemonlogger.html
>>
>
>
>



More information about the NANOG mailing list