Redistribute routes from EIGRP into BGP VRF

Fri Aug 10 01:00:01 UTC 2007

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Bailey Stephen wrote:
> Hello all,
> 
>  
> 
> Currently working on a solution at the moment where I receive specific
> /25 routes via a leased line into the global routing table via EIGRP on
> a Cisco 2801.
> 
>  
> 
> I then need to inject these routes into a BGP VRF to be advertised onto
> BGP Peers within the VRF Network.
> 
>  
> 
> The /24 routes for the Site LAN are injected via Radius on the DSL
> Routers so this task makes the /25 more favourable via the Leased Line
> Router.
> 
>  
> 
> ==================================================
> 
> IOS Version on 2801 (Router B) = Version 12.4(12a)
> 
>  
> 
> BGP VRF Config:
> 
> router bgp 65xxx
> 
>  no synchronization
> 
>  no bgp log-neighbor-changes
> 
>  bgp scan-time 10
> 
>  no auto-summary
> 
>  !       
> 
>  address-family ipv4 vrf test1
> 
>  redistribute connected
> 
>  redistribute static
> 
>  redistribute eigrp
> 
> ?
> 
> ==================================================
> 
> Simple Diagram attached
> 
>  
> 
> Routers C & D do not see the redistributed routes from Router B via BGP.
> 
>  
> 
> Not sure if this is an IOS Bug, but this should work??
> 
>  

You need support for "BGP Support for IP Prefix Import from Global Table
into a VRF Table"

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hirp_c/ch05/h_bgivt.htm

Support is available starting in 12.0(29)S, 12.2(25)S, and 12.3(14)T.

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFGu7iRE1XcgMgrtyYRAtiSAJ9g+GWFNTdSgCmiuFM6IFX6+rKUFQCeOk92
B9sK68gPcKvLedXhPFwH9+w=
=o9ot
-----END PGP SIGNATURE-----