40Gbit private peer

Leigh Porter leigh.porter at ukbroadband.com
Thu Aug 2 18:36:12 UTC 2007


Hey,

BEcause you really need it ;-)

30 second input rate 77849000 bits/sec, 7236 packets/sec
30 second output rate 17464000 bits/sec, 5023 packets/sec

Very nice though, it'll be great for all the P2P.

--
Leigh



Peter Lothberg wrote:
> SUnet (AS1653) and STUPI (AS1880) want to announce that 
> we have brought up what we believe is the first private 
> peer at 40G between two independent networks.
>
> It speaks IPv4, IPv6 both unicast and multicast.
>
> -Peter
>
> ------------------------------------------------------------------------
>
> RP/0/RP0/CPU0:HFR1-F#sh int pos 0/3/0/0
> POS0/3/0/0 is up, line protocol is up
>   Interface state transitions: 2
>   Hardware is Packet over SONET/SDH
>   Description: OC768 Private Peering to Sunet <ip at nordu.net>
>   Internet address is 193.11.20.146/30
>   MTU 4474 bytes, BW 39813120 Kbit
>      reliability 255/255, txload 0/255, rxload 0/255
>   Encapsulation HDLC, crc 32, controller loopback not set, keepalive set (10 sec)
>   Last clearing of "show interface" counters 1d00h
>   30 second input rate 77849000 bits/sec, 7236 packets/sec
>   30 second output rate 17464000 bits/sec, 5023 packets/sec
>      115627177 packets input, 155140727534 bytes, 0 total input drops
>      0 drops for unrecognized upper-level protocol
>      Received 0 runts, 0 giants, 0 throttles, 0 parity
>      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
>      78946374 packets output, 34499886901 bytes, 0 total output drops
>      0 output errors, 0 underruns, 0 applique, 0 resets
>      0 output buffer failures, 0 output buffers swapped out
>
> RP/0/RP0/CPU0:HFR1-F#sh controllers soNET 0/3/0/0
> Port SONET0/3/0/0:
>
> Status: Up
>
> Loopback: None
>
> SECTION
>   LOF = 0          LOS    = 0                            BIP(B1) = 0
> LINE
>   AIS = 0          RDI    = 0          FEBE = 0          BIP(B2) = 0
> PATH
>   AIS = 0          RDI    = 0          FEBE = 0          BIP(B3) = 0
>   LOP = 0          NEWPTR = 0          PSE  = 0          NSE     = 0
>   PLM = 0          TIM    = 0
> Detected Alarms: None
> Asserted Alarms: None
> Mask for Detected->Asserted: None
> Detected Alerts: None
> Reported Alerts: None
> Mask for Detected->Reported: None
> Alarm reporting enabled for: SLOS SLOF SF_BER PLOP
> Alert reporting enabled for: B1-TCA B2-TCA B3-TCA
>
> Framing: SONET
> SPE Scrambling: Enabled
> C2 State: Stable   C2_rx = 0x16 (22)   C2_tx = 0x16 (22) / Scrambling Derived
> S1S0(tx): 0x0  S1S0(rx): 0x0 / Framing Derived
>
> PATH TRACE BUFFER : STABLE
>   Remote hostname : c1sth-re1 so-7/0/0
>   Remote interface:
>   Remote IP addr  :
>
> APS
> No APS Group Configured
>   Protect  Channel 0   DISABLED
>   Rx(K1/K2) : 0x00/0x00
>   Tx(K1/K2) : 0x00/0x00
>   Remote Rx(K1/K2):  1/    Remote Tx(K1/K2):  1/
>
>
> BER thresholds:  SF = 10e-3  SD = 10e-6
> TCA thresholds:  B1 = 10e-6  B2 = 10e-6  B3 = 10e-6
>
>   Optics type: VSR2000-3R2 (2km)
>   Clock source: internal (actual) internal (configured)
>
> Optical Power Monitoring (accuracy: +/- 1dB)
>   Rx power = 1.3796 mW, 1.4 dBm
>   Tx power = 1.7380 mW, 2.4 dBm
>   Tx laser current bias = 58.3 mA
>   



More information about the NANOG mailing list