Q on what IGP routing protocol to use for supplying only gateway address
Michael Nicks
mtnicks at kanren.net
Thu Sep 14 18:00:04 UTC 2006
From the sounds of what you are trying to accomplish, I'd think
VRRP/HSRP would be more up your alley than any dynamic routing protocol.
Also look at NIC teaming.
Best Regards,
-Michael
--
Michael Nicks
Network Engineer
KanREN
e: mtnicks at kanren.net
o: +1-785-856-9800 x221
m: +1-913-378-6516
william(at)elan.net wrote:
>
>
> I need to implement a sort-of failover-loadbalancing where systems
> would receive gateway address from at least two routers (including
> metric preference if possible). This needs to be done so that no special
> additional config is required on routers for each new system and for
> each system all they need is gateway address and nothing else (no routes
> will be advertised to the router; but for security I'll want to specify
> that no routes should be accepted). The systems receiving the routes
> would be primarily linux PCs but will also include several windows and
> solaris machines. I don't want to use RIP (any version) or proxy ARP.
> The routers are currently all cisco equipment.
>
> Any suggestion as to what IGP protocol is best for this scenario?
>
More information about the NANOG
mailing list