Fire Code/UFC Regs?
Joe Maimon
jmaimon at ttec.com
Sun Mar 13 14:27:03 UTC 2005
Josh Vince wrote:
> Here's what APC has to say about it:
>
> http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/std_adp.php?p_sid=jTAq9iAh&p_lva=&p_faqid=1372&p_created=1010390400&p_sp=cF9zcmNoPTEmcF9ncmlkc29ydD0mcF9yb3dfY250PTM4NyZwX3NlYXJjaF90ZXh0PXN1cmdlIGludG8gVVBTJnBfc2VhcmNoX3R5cGU9MyZwX3Byb2RfbHZsMT1_YW55fiZwX3Byb2RfbHZsMj1_YW55fiZwX3BhZ2U9Mg**&p_li=
>
> Sorry about the wrap...
>
> Basically, they say not to plug surge strips into the output of a UPS.
> You should use PDU's instead.
>
> Josh
>
Summary I read:
PowerStrips/Surge protectors are junky things which dont distribute
voltage/amperage equaly, so you should not use them with a UPS.
1) How does this stated/assumed condition become more relevant for a UPS
than for any other use?
2) I highly doubt that such a blanket assumption can be made about the
literally thousands of branded surge protecters and power strips.
3) They admit that they are talking out of their a** when they say this
does not affect the warranty.
4) Since the odds are fairly strong that any device that draws 15-20
Amps * 110 volts in wattage will cause (most) batteries to go overload,
I see no specific reason to be concerned that other devices on the strip
may not get enough juice. In short, that would be the least of my problems.
5) Having surge protectors IS good. Now any device that overloads/makes
the circtuit too warm shuts itself off. Everything else on the battery
hums along merrily. Just like my kids flipping the AC on and off
repeatedly.....surge cuts it off and my computer continues merrily on.
How does the battery deal with equipment that tries to draw surges of power.
I dont see anything valid there. But more to the point I dont see
anything that would explain it being against regs.
Perhaps someone who knows EE can enlighten me?
Joe
More information about the NANOG
mailing list