E1 - RJ45 pinout with ethernet crossover cable
Per Gregers Bilse
bilse at networksignature.com
Fri Feb 25 12:18:24 UTC 2005
On Feb 25, 12:03pm, Alex Bligh <alex at alex.org.uk> wrote:
> One circumstance where this does work is connecting (for instance) an E1
> trunk connection between (say) two FR switches in the same room, provided
> you remember to set exactly one end to originate, and one end to receive
> clock (i.e. where there are no carriers involved).
Fair enough. Pin-out is not the same as ethernet, but same idea; there's
a very clear diagram here about 2/3s down the page:
http://www.nettonet.com/support/docs/220-0000081_r01.n2n
-- Per
More information about the NANOG
mailing list