3 Mb question
Stephen J. Wilcox
steve at telecomplete.co.uk
Wed Oct 13 22:03:30 UTC 2004
multilinking t1s will work fine.
but depending on your customer, there are lots of things between a T1 and DS3..
such as 10Mb ethernet
On Wed, 13 Oct 2004, Gerald wrote:
> I've got what seems to me like an innocuous question for this list...
> Someone is requesting access to about 3 mb of traffic up/dn. I figure 2
> T1s will give them the 3 Mb I need, but I'm looking for suggestions on
> either efficiently combining those 2 to get the most bandwidth for their
> buck or else I have to look at getting them a ds3 and scaling back to
> what they need.
> Is there an good low end suggestion for making effective use of 2 T1s to
> give 3 Mb of bandwidth? In practice, I've seen 2 T1s load balanced with
> CEF not do very well at giving a full 3 Mb. (This was without turning on
> per-packet CEF)
> I'm not personally experienced with MLPPP or mux hardware if that helps,
> but I could get it set up if that's the consensus as the best option.
> The NRC of something that would effectively couple the 2 T1s would
> easily beat the MRC of a DS3 which I think might be overkill for just 3
> Thanks for suggestions and tips.
More information about the NANOG