New route-views collector up at the LINX
David Meyer
dmm at 1-4-5.net
Wed Mar 17 19:19:51 UTC 2004
Folks,
We are now up and running at the LINX (London Internet
Exchange) and would like to invite folks at the LINX to
peer with route-views. You can get to the open CLI via
'telnet route-views.linx.routeviews.org' (of course,
nothing much there yet).
Please contact us at help at routeviews.org if you would
like to contribute your view. In addition, I've included
our standard boilerplate below.
Thanks,
The Route-Views Team
-----
AS : 6447
University of Oregon:
route-views : 128.223.60.103 (multi-hop IPv4)
route-views2 : 128.223.60.102 (multi-hop IPv4)
route-views3 : 128.223.60.108 (multi-hop IPv4)
: 2001:468:d01:3c::80df:3c6c (multi-hop IPv6)
route-views6 : 128.223.60.194 (v6 peering only)
: 2001:468:d01:3c::80df:3c6d (multi-hop IPv6)
route-views.wide: 202.249.2.166 (WIDE peering only)
route-views.paix: 198.32.176.5 (PAIX peering only)
route-views.linx: 195.66.225.222 (LINX peering only)
route-views.linx: 195.66.227.222 (LINX peering only)
- Route-views does not announce _any_ prefixes.
- We would like to receive a full default-free table from all
sessions with all peers.
- In order for our multihop-ebgp sessions to survive transient
network failures, we would like to increase the BGP hold-timer
to 10 minutes (600 seconds). A value of zero does not work for
several cases. If possible, peers should set their hold-timer
to the max value which allows Route-Views to change without
your intervention.
cisco: neighbor 128.223.60.x timers 21845 65535
juniper: set protocols bgp group routeviews hold-time 65535
- Please send your communities. If possible, please describe the
communities you advertise.
- Please provide your NOC's email and telephone number(s).
- Route information from these sessions is made publicly
available in two forms: manufacturer-style "show ip bgp" and
MRT format.
--
Short questionnaire. These data will only be shared with researchers.
- What type of router(s) are we peering with?
- We have a (closed) mail list which we use to announce outages
to our peers. If you would like your noc added to this list,
please let us know.
Thanks!
More information about the NANOG
mailing list