ATM/IP video

Thu Jul 29 12:29:22 UTC 2004

Tracey Webb wrote:

> I am attempting to bridge multiple ATM vc's on a single port OC12c in my
> Cisco 12008. The vc's are coming from VTC video equipment. Each vc is a
> different channel. I need to terminate it and pass over the IP's to my
> gigE port. Any suggestions.

Maybe this works...

interface ATM6/0
  no ip address
!
interface ATM6/0.1 multipoint
  range Video pvc 1/100 1/199
  bridge-group 1
!
interface GigabitEthernet2/8
   ...
   bridge-group 1

-- 
Robert Blayzor, BOFH
INOC, LLC
rblayzor at inoc.net
PGP: http://www.inoc.net/~dev/
Key fingerprint = 1E02 DABE F989 BC03 3DF5  0E93 8D02 9D0B CB1A A7B0

Life would be much easier if I had the source code.