OT: xDSL hardware
Joe Maimon
jmaimon at ttec.com
Wed Jul 14 11:14:15 UTC 2004
Sam Stickland wrote:
>On Tue, 13 Jul 2004, Eric Kagan wrote:
>
>
>
>>>>Is anyone aware of a WIC card that will work with the lower end Cisco
>>>>
>>>>
>>gear
>>
>>
>>>>(1700 or 2600 series) that will allow me to terminate an ADSL or
>>>>preferably an SDSL line directly on the router? The idea being that the
>>>>router is then aware of link up/down status...
>>>>
>>>>
>>There is a WIC-1ADSL for 1700/2600. Not sure about an SDSL WIC. We have
>>done a few T1/ADSL and ADSL/ISDN setups and it seems to work fairly well. I
>>also spoke to a computer integrator that claimed they were working with
>>Cisco to develop a ping like action for determining if the next hop was
>>alive and if not set the interface down so it would failover to secondary
>>interface / route. I assume it would be a 12.3(x) ish release.
>>
>>
>
>I believe you're talking about this, available in 12.3(8)T.
>
>Reliable Static Routing Backup Using Object Tracking
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123limit/123x/123xe/dbackupx.htm
>
>Sam
>
>
>
>
Yes but is 12.3(8)T available for the 1700/2600 routers? IIRC, not.
Joe
More information about the NANOG
mailing list