No "encapsulation" command on IOS 12.2(12a) ??

Fri Oct 24 14:55:11 UTC 2003

You need the "plus" image

Michel.

-----Original Message-----
From: owner-nanog at merit.edu [mailto:owner-nanog at merit.edu] On Behalf Of
Roman Volf
Sent: Friday, October 24, 2003 2:49 AM
To: nanog at merit.edu
Subject: No "encapsulation" command on IOS 12.2(12a) ??

Show Version:

Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE
(fc1)

flash image:
System image file is "flash:c3620-i-mz.122-12a.bin"

I'm trying to configure a FastEthernet sub interface for 802.1q VLANs,
but
theres no encapsulation command. I've googled it up for about 2 hours
and
have come up with nothing... the following command sequence is
documented
dozens of times:

As shown on:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft
/120t/120t1/8021q.htm#wp3944
interface fastethernet slot/port.subinterface-number
encapsulation dot1q vlanid

Any help would be appreciated.