IntraLATA vs. InterLATA Ckt Reliability

Andy Dills andy at xecu.net
Mon Jun 16 22:21:03 UTC 2003


On Mon, 16 Jun 2003, William R. Lorenz wrote:

>
> Can someone with a bit of experience in telco line engineering speak to
> IntraLATA vs. InterLATA DS-1 circuit reliability?  More specifically, is
> it more likely for multiple DS-1 circuits to be aggregated using a single
> piece of multiplexing equipment when heading into another LATA, thus
> increasing the chance of combined failure of two diverse circuits at a
> single point?  I would love to have two diverse T1 circuits coming into
> the offices, but it looks like they'll ultimately traverse the same telco
> switches, both at the local and regional interconnection levels (? more
> info ?), and it seems as though this presents increased risk.  We have
> entrance failities for just one LEC in our office building here, and I
> understand that a new telco buildout would require lots of investment.
>
> I've actually talked with LEC engineers about the various switching
> stations in the area, and it seems as though everything is aggregated
> through a single central office before hitting the other LATAs.  Have
> others encountered this same kind of topology in the past?  What are some
> of the things that can be done to help ensure circuit diversity?

Maybe I'm just really lucky, but I've never had an entire central office
go down on me.

(restrain yourselves, I'm aware of the softball I just lobbed)

You don't mention what entrance facilities are in your building; I'm
assuming it's a part of your LEC's SONET ring. You can ask how that
circuit is built (diverse physical paths back to the CO?), but at the T1
level, I doubt you'll even get somebody to answer your questions...and if
they do, chances are they're telling you what you want to hear. Few people
really know how the fiber is run, and you don't have their phone number.

Bottom line is that you're going to have to rely 100% on the last mile
provided by your LEC. You could contract with a CLEC to take your circuit
cross-LATA; it's cheaper, and will most likely ride their fiber from CO to
CO as opposed to on the LECs fiber.

Andy

---
Andy Dills
Xecunet, Inc.
www.xecu.net
301-682-9972
---




More information about the NANOG mailing list