VoIP QOS best practices
Aditya
aditya at grot.org
Mon Feb 10 19:09:51 UTC 2003
> On Mon, 10 Feb 2003 10:27:39 -0800 (PST), Bill Woodcock <woody at pch.net> said:
> Look, just do it, and you'll see that there aren't any problems in
> this area.
For those looking to "just do it", it's not very complicated or
expensive to try -- and the quality is very, very good esp. if you
have broadband. For an easy, step-by-step way to try it out over the
public, non-QoS Internet, look at the steps at:
http://www.pulver.com/fwd
(yes, there are other free, public SIP servers, but I haven't found
any with as much useful "documentation" and I'm not associated with
pulver.com except for being an enthusiastic FWD user)
FWIW, I purchased a Cisco ATA-186 and then a 7960 on eBay (after
trying out MS Messenger and finding it lacking) and they just work. I
also have used the same units to get a PSTN phone number routed over
IP using www.iconnecthere.com -- and you can make it work behind NAT
too (but I can assure you it's easier without NAT).
I'm willing to play tech support via email if anyone has questions
about getting started.
Adi
More information about the NANOG
mailing list