Cross-country shipping of large network/computer gear?
JC Dill
nanog at vo.cnchost.com
Thu Aug 28 05:00:27 UTC 2003
At 08:32 PM 8/27/2003, Eric Kuhnke wrote:
>http://colofinder.net/gallery/view_album.php?set_albumName=album18
>
>Although this is a small item, I believe it wins the contest for "Most
>thoroughly damaged shipment".
Oh dear! Yes, I do think you are the winner (so far).
just me <matt at snark.net> wrote:
> >http://www.16paws.com/FedEx/
The first damaged shipment at this URL was not correctly packed. You can't
expect styrofoam peanuts *alone* to properly cushion and center a router in
a box, even when you wrap the router itself in bubble wrap. The peanuts
will shift, your router will end up abutting the box at one point or
another, especially if the box is dropped (even if it's only dropped a
short distance, such as can happen when it's being loaded and dropped/slid
into place on a stack of boxes). That's why it's important to use the
packing cases that the router came in from the manufacture (with the
special styrofoam inserts) whenever possible, to properly center your
router in the box. If you can't get the correct inserts, use inserts from
some other shipment and cut them to fit. Create a ~3 inch layer below the
router, add peanuts to fill in that layer between the makeshift inserts,
set the router in the box, put more inserts next to the router (~3 inches
on all sides) and fill the gaps with peanuts, put more inserts on top (~3
inches) and fill the gaps with peanuts. The inserts will hold the router
in the *center* of the box and will prevent the peanuts from shifting
enough to allow the inserts to shift and let the router move towards one of
the box sides. And as you can see, the box itself should be large enough
that you can put ~3+ inches of padding on all sides around the
computer. That's why a 1u server typically comes in a box that's 8 to 10
inches thick.
When you are shipping something heavy and fragile (in that it can be
damaged if the box is dropped or if something is dropped on the box), you
have a responsibility to properly pack the box to minimize damage. Don't
count on insurance or the shipper to reimburse you if the item is damaged
due to inadequate packing. Wrapping an item in bubble wrap and then
placing it in the middle of styrofoam peanuts may work for some items, but
a critical and expensive piece of computer hardware NEEDS more protection.
Ebay vendors who specialize in selling fragile items use a process called
"double boxing". You wrap the item in bubble wrap, put it in a box with at
*least* 1 inch of space all around the bubble wrap, with styrofoam peanuts
filling that 1 inch gap. Then you place this box in a larger box with
another 1 inch of space all around. Put 1 inch of peanuts in the larger
box, place the smaller box on this layer and fill all around and on top
with more peanuts, filling them in tightly enough to help prevent the box
from shifting. So if you are packing an item that's 6 inches across, the
smaller box is at least 8 inches, the larger box is at least 10
inches. For something heavy like a router, you need more than 2 inches of
padding.
Just some food for thought the next time you pack something for shipment.
jc
More information about the NANOG
mailing list