Bogon list
Sabri Berisha
sabri at cluecentral.net
Thu Jun 6 08:59:20 UTC 2002
On Tue, 4 Jun 2002, David McGaugh wrote:
> Cisco:
> Router(config)#ip traceroute source-interface ?
> % Unrecognized command
> Hmmm...
>
> Router(config)#ip ping source-interface ?
> % Unrecognized command
> Hmmm...
>
> Juniper:
> [edit]
> Router# set system default-address-selection
> Hey that works!
>
> Is there a way of doing this on a Cisco?
telecity#traceroute
Protocol [ip]:
Target IP address: 62.250.2.2
Source address: 213.136.14.133
Numeric display [n]:
Timeout in seconds [3]:
Probe count [3]:
Minimum Time to Live [1]:
Maximum Time to Live [30]:
Port Number [33434]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Type escape sequence to abort.
Tracing the route to santpoort.vuurwerk.nl (62.250.2.2)
1 sara.amsix-ge1.versatel.net (193.148.15.47) [AS 1200] 0 msec 0 msec 0 msec
2 62.58.62.194 [AS 13127] 4 msec 4 msec 4 msec
3 ge5-0-0.b1.vuurwerk.versatel.net (62.58.58.34) [AS 13127] 0 msec 4 msec 0 msec
4 santpoort.vuurwerk.nl (62.250.2.2) [AS 15942] 4 msec 0 msec 4 msec
telecity#
Without giving the source address parameter, the traceroute would
originate from 193.148.15.200, which is the routers peering ip.
--
Sabri Berisha
"I route, therefore you are"
~ my own opinions etc ~
Join Megabit LAN in open air! http://www.megabit.nl
More information about the NANOG
mailing list