Cisco 4000 series switches
J.J. Guy
jjg at cwru.edu
Thu Jul 18 02:28:42 UTC 2002
I've seen the same behavior with a Catalyst 2948G. My servers weren't
experiencing any problems, and appeared to be connecting at 100/Full -
despite what the Fluke reports. If I recall correctly, the 2948s use the
same software base as the 4000s - I've written it off as a software
incompatibility between the 2948/4000 code and the Fluke.
I did a cursory search of Cisco's bug reports, but found nothing related.
My advice is to ignore the auto-negotiate between the 4000 and the Fluke.
J.J.
> From: Joes Jobs <joej at mail.rocknyou.com>
> Date: Tue, 16 Jul 2002 03:56:22 -0700
> To: nanog at merit.edu
> Subject: Cisco 4000 series switches
<snip>
> However the line analyzer says duplex is half, but advertised full.
> When I set the node in question to Half Duplex, the switch reports half duplex
> as well.
More information about the NANOG
mailing list