FW: router startup behavior

Fri Jan 18 05:11:52 UTC 2002

	You may want to consider using tftp/rcp/whatnot loaded
files for this.

	As it loads [most if not all depending on the config length] all
of the config then parses it promptly.

	this will prevent leakage in rare cases.

	- jared

On Tue, Jan 15, 2002 at 07:21:18PM +0000, Simon Lockhart wrote:
> 
> >This way, the neighbor has much less time to come up without filters since
> >we're immediately putting it in admin idle after naming it.
> 
> It's not as bad as it sounds though - IOS waits for 30 seconds after the 
> "neighbor w.x.y.z remote-as 123" before trying to bring the sessions up - 
> giving you time to complete the configuration. 30 seconds always seems 
> long enough for a manual configuration (unless the phone rings after the 
> first line), so an automatic configuration should be fine.
> 
> Simon
> -- 
> Simon Lockhart                       |   Tel: +44 (0)1737 839676 
> Internet Engineering Manager         |   Fax: +44 (0)1737 839516 
> BBC Internet Services                | Email: Simon.Lockhart at bbc.co.uk 
> Kingswood Warren,Tadworth,Surrey,UK  |   URL: http://support.bbc.co.uk/
> 

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.