zebra/ospf issue

Mark Radabaugh mark at amplex.net
Sat Feb 9 02:38:01 UTC 2002



> -----Original Message-----
> From: owner-nanog at merit.edu [mailto:owner-nanog at merit.edu]On Behalf Of
> Josh Gentry
> Sent: Friday, February 08, 2002 1:38 AM
> To: nanog at merit.edu
> Subject: zebra/ospf issue
>
>
>
> Folks,
>
> I'm experimenting with using Zebra running on a Debian box to
> do OSPF with
> the Ciscos on our network.  The zebra box has 2 interfaces, each in a
> different area.  This is the first time we have tried to impliment
> multiple areas on our network.  Right now, area 51 consists
> only of the
> zebra box and a Cisco 2500, and is just for testing.
>
> The zebra box is forming a full adjacency with the Cisco in
> area 51 with
> no problems.  It will not, however, become fully adjacent
> with the DR and
> BDR in area 0.  This seems to be preventing the distrobution

I think this is normal behavior (without really analyzing things...).
See if this helps any: http://www.cisco.com/warp/customer/104/11.html

Mark Radabaugh





More information about the NANOG mailing list