Sample CISCO Border Router Config
Mark Borchers
mborchers at splitrock.net
Wed Feb 21 15:11:14 UTC 2001
There is also some config boilerplate at
http://www.cymru.com/~robt/Docs/Articles/index.html
<http://www.cymru.com/~robt/Docs/Articles/index.html>
Not necessarily border-router specific, but contains
some useful info.
-----Original Message-----
From: Steve Smith [mailto:SSmith at freeliant.com]
Sent: Wednesday, February 21, 2001 8:32 AM
To: Kenneth D. Paquette; nanog at merit.edu
Subject: RE: Sample CISCO Border Router Config
This one is pretty good.
http://www.attrition.org/~modify/texts/phrack/Phrack55/P55-10
<http://www.attrition.org/~modify/texts/phrack/Phrack55/P55-10>
-----Original Message-----
From: Kenneth D. Paquette [ mailto:ken at btv.ibm.com <mailto:ken at btv.ibm.com>
]
Sent: Wednesday, February 21, 2001 8:16 AM
To: nanog at merit.edu
Subject: Sample CISCO Border Router Config
I remember seeing a pointer to a CISCO Border Router Config on one of the
lists in the last few months an thought I saved the URL. Now I can't find
it. I have searched the archives to no avail. I am not sure if it was
NANOG or one of the firewall lists, but figured I would start here
first. I believe is a link into the SANS institute, but can't find it
there either. Any help would be appreciated.
Thanks
--------------------------------------------
Ken Paquette
Program Manager
Global Internetwork Planning
Technology Deployment
Office of the CIO
More information about the NANOG
mailing list