More 6509 problems...
Rodney Dunn
rodunn at cisco.com
Thu Feb 1 23:21:48 UTC 2001
Danny,
The interface status should be independent of
the swithcing path. I've never seen the line
state be affected by the switching mechanism
(although I have seen the opposite).
Can you email me the case# you had so I can take
a look?
rodney
On Tue, Jan 30, 2001 at 02:22:21PM -0600, Danny Snyder wrote:
>
> Ya got me on that one....Cisco didn't really say why and I didn't think to
> ask them either....
>
> --Danny
>
>
>
>
> -----Original Message-----
> From: Kenny Sallee [mailto:k_sallee at yahoo.com]
> Sent: Tuesday, January 30, 2001 11:28 AM
> To: agudgeon at firstnet.co.uk; 'Danny Snyder'
> Cc: nanog at merit.edu
> Subject: Re: More 6509 problems...
>
>
> How would CEF cause an interface to be up/down? Just curious....Kenny
>
> ----- Original Message -----
> From: "Alison Gudgeon" <agudgeon at firstnet.co.uk>
> To: "'Danny Snyder'" <dsnyder at nowdocs.com>; <nanog at merit.edu>
> Sent: Tuesday, January 30, 2001 8:36 AM
> Subject: RE: More 6509 problems...
>
>
> >
> > Hi
> >
> > Hybrid IOS
> >
> > I've got IP CEF DISTRIBUTED set globally. Did you have it enabled or
> > disabled on the T3 interface?
> >
> > Ali
> >
> > -----Original Message-----
> > From: Danny Snyder [mailto:dsnyder at nowdocs.com]
> > Sent: 30 January 2001 16:21
> > To: agudgeon at firstnet.co.uk; nanog at merit.edu
> > Subject: RE: More 6509 problems...
> >
> >
> > Alison,
> >
> > I've had VERY similar problems with a 6509 (Sup 1a + MSFC2) with a FlexWAN
> > and a PA-2T3+. After spending the better part of two weeks on the phone
> > with Cisco, we finally determined that ip cef distributed needed to be
> > turned on in global configuration.
> >
> > Also, are you running native IOS or Catalyst OS on the Supervisor and IOS
> on
> > the MSFC ?
> >
> > Danny Snyder
> > Network Administrator
> > NowDocs, Inc.
> >
> >
> >
> >
> > -----Original Message-----
> > From: owner-nanog at merit.edu [mailto:owner-nanog at merit.edu]On Behalf Of
> > Alison Gudgeon
> > Sent: Tuesday, January 30, 2001 10:18 AM
> > To: nanog at merit.edu
> > Subject: More 6509 problems...
> >
> >
> >
> > Hi,
> >
> > Is anyone doing the following:
> >
> > 6509 (supervisor 1a + msfc) - with a flexWAN adapter to take a Packet Over
> > Sonet OC-3 card.
> >
> > I'm having great problems getting up/up on the interface, the current
> > situation is up/down, a hardware loop at the telco kit brings the line
> up/up
> > but otherwise just up/down. Config is default I've just put IP's on.
> >
> > I'm running very new code - 12.1(4)E1
> >
> > many thanks in advance for any help.
> >
> >
> > Kind Regards
> >
> >
> > Alison
> >
> >
>
More information about the NANOG
mailing list