RIP and RIPv2, "The glue that makes the internet work"

Sat Apr 28 19:03:13 UTC 2001

At 12:11 AM 4/27/01 +0000, bmanning at vacation.karoshi.com wrote:

> >
> >
> > > What was/is the largest production network (in number of end nodes) that
> > > used/uses RIP as the IGP?
> >
> > Xerox routed a few thousand subnets of 13/8 with RIP (v1!) as late as 1998.
> > Dunno if that's large enough.
> >

Bill it was like this in 2000 still ,then they went EIGRP. I dont know 
about the
core but it makes one scary EIGRP network no areas !!!!!!. But the EIGRP
seems very stable touch wood.

Mind you I rember Luc De Ghein in the Cisco TAC saying that none
of the ISP's he works with have more than one ISIS area. I am hopping
this has changed.

Regards,
Kevin

> >   Bill
> >
>
>         Its pretty big.  Most of the data is not verifiable, but
>         a profile of 100-10,000 subnets, between 5-2000 nodes per subnet
>         w/ RIPv1 seems to be emerging for sites like Xerox as well
>         as old NSFnet regionals.
>
>         On the other hand, reports of large, multinational networks
>         running static routing in their cores seem to indicate a
>         desire to have routing in the core more stable than any dynamic
>         protocol will allow.
>
>         With the growth in the number of injected prefixes and varient
>         paths, one might say that the "value proposition" of dynamic
>         routing is not what it once was... Or it could be that the
>         folks running the big networks are more comfortable with
>         manual/static routing systems?  Such environments certainly
>         provide easier means to set enforcable service level agreements.
>         But my muse has gotten the better of me.
>
>--bill

*********************************IMPORTANT NOTICE******************************
All e-mails for technical support must be cc'd to support at lancomms.ie. This
ensures that the call is logged with the support desk and the case is actively
tracked which speeds up the response you will receive. If you have an urgent
problem you _must_ contact the support desk directly on 01-4093030.
*****************************************************************************************