Traffic engineering tools

Fri Oct 22 03:49:07 UTC 1999

If you don't want a GUI and the fancy what if scenarios, it is not difficult
to write
a Perl/Script that does constraint-based routing or Multi-commodity flow
problems.

I would guess 2-3 weeks if one is familiar with basic linear programming.

Bora

-----Original Message-----
From: Robert Tsay [mailto:cctsay at globalcenter.net]
Sent: Thursday, October 21, 1999 5:28 PM
To: Bora Akyol; 'Sean Donelan'; nanog at merit.edu
Subject: Re: Traffic engineering tools

After the investigation, currently only WANDL in the market can do/support
the

MPLS+ATM or IP simulation. So the bad thing is the software is very
expensive.

It's the only software that can simulate Constraint-Based routing now.

R.

----- Original Message -----
From: Bora Akyol <akyol at pluris.com>
To: 'Sean Donelan' <sean at donelan.com>; <nanog at merit.edu>
Sent: Thursday, October 21, 1999 2:25 PM
Subject: RE: Traffic engineering tools

>
> I believe that WANDL has a tool that can be used for
> static TE purposes, but you are on your own for traffic
> models.
>
> Bora Akyol
> Pluris, http://www.pluris.com
>
> -----Original Message-----
> From: Sean Donelan [mailto:sean at donelan.com]
> Sent: Wednesday, October 20, 1999 11:21 PM
> To: nanog at merit.edu
> Subject: Traffic engineering tools
>
>
>
> At NANOG the lack of traffic engineering tools came up.  Has anyone
> heard of any packages coming to market.  Or looked if tools from
> other industries could be used as a starting point.  Anything from
> the electric power transmission or road traffic world we could use?
> Or do IP packets have such different properties (e.g. re-transmission,
> independent next-hop behavior, etc), its not a good idea to even try.
>
>