Question on filter-list config with peer goups
Steve James
steve at wisper.net
Thu Mar 12 17:55:11 UTC 1998
Andrew,
I believe its because you already have an outbound filter in place and the peer-group is only allowed a single uniform outbound filter set.
Sure someone will correct me if I'm wrong :-) . If you want to do this you'll need a seperate group :(
"Members of a peer group inherit all of the configuration options of the peer group. Peer group members can also be configured to override configuration options if the options do not affect outgoing updates. That is, you can only override options that are set for incoming updates."
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/icsbgp4.htm#xtocid2260336
Steve
-----Original Message-----
From: Andrew Brown [SMTP:andrew.brown at corp.istar.ca]
Sent: Thursday, March 12, 1998 5:01 PM
To: nanog at merit.edu
Subject: Question on filter-list config with peer goups
Question:
WHen you have a peer configured in a peer group the peering session
policy is implemenated according to the peer group definition ie:
<bigger>neighbor testgroup peer-group
neighbor testgroup remote-as 2493
neighbor testgroup update-source Loopback0
neighbor testgroup send-community
neighbor testgroup version 4
neighbor testgroup route-map mci-bbone out
neighbor testgroup filter-list 70 out
</bigger>
<bigger>neighbor 130.200.17.250 peer-group testgroup
neighbor 150.300.12.13 peer-group testgroup
Why is it that when I try to remove the filter-list statement out of the
peer group definition it gives me an error?? It appears you cannot
assign different filter-lists to individual
members of a peer-group.
ie
no neighbor testgroup filter-list 70 out = works OK
then ..
neighbor 130.200.17.250 filter-list 70 out
produces this error
% Invalid command for a peer-group member
</bigger>I am trying to apply a different filter-list to different
members of the same peer group.
Can anyone offer their advice/experience
greatly appreciated - I am definitly stuck here!
Andrew
--------------------------------><<-------------------------
Andrew Brown - Internetwork Design Engineer - Service Development
iSTAR internet inc Tel: (613)780-2210
250 Albert Street Fax: (613)780-6666
Ottawa, Ont, Canada K1P 6M1
More information about the NANOG
mailing list