Cisco scripts??

Tue Jul 7 18:43:09 UTC 1998

You would need to have a MIB for them.  The best way to find
out is to use a tool like Scotty to walk the MIB.  I don't
think that cisco stores the ASCII config as a MIB entry.

What you probably want is to grab the config via a rcp from
the box.  I would recommend looking at the looking glass tools
from DIGEX (nitrous.digex.net).,  Should give you some ideas on code

hope this helps..

jmbrown at ihighway.net

At 11:47 AM 7/7/98 -0500, you wrote:
>	Does anyone know where I can get ahold of some sort of script that querys
>the routers via SNMP that shows the running configs on them?  I want to
>have a web based interface that ONLY shows the running configs.  I am aware
>of the built in http server that is on the routers, but I would rather do
>it via SNMP .  Any information would be appreciated.
>
>Thanks,
>
>Tim Kempka
>
>
>____________________________________________________
>Tim Kempka                                  E-Mail: tim at flash.net
>Network Engineer                         Pager: page_tim at flash.net
>FlashNet Communications             Phone: 817-589-2390 ext. 378
> 