Question ??
Michael Park
mpark at corp.idt.net
Tue Aug 12 13:20:34 UTC 1997
this is nanog.
not the mrtg mailing list.
goto http://ee-staff.ethz.ch/~oetiker/webtools/mrtg
* Mailing list archives are at http://www.ee.ethz.ch/~slist/mrtg
______
\____/ Michael Park EMail: mpark at corp.idt.net
\__/ Network Engineer Phone: 201 928 2954
\/ IDT Corporation Pager: 800 225 0256 PIN: 85452
On Mon, 11 Aug 1997, Ignacio Funes Maderey wrote:
>
>
> I have tried to run mrtg with my router (Cisco 7500). This router has a
> controller which accept an E1 and divides it as you want. The interfaces
> that are not directly connected to this controller are OK (for example
> interfaces such as Serial5/2, Ethernet3/5, etc...), but I have problems
> with those interfaces such as (Serial5/0:14, Serial5/0:13, etc.). The
> problems arise since I run cfgmaker public at router_ip, because the ports
> related with the interfaces directly connected to the controller are
> wrong. In fact, when I run ./mrtg mrtg.cfg I get the next error messages:
>
> CFG Error in "maxbytes[enepacatlan(rdi/e1)]": 256000 must be a Number
> smaller than maxint
>
> ........
>
> What should I do??????
>
> I will appreciate your help. Thank you!!!!!!
>
>
>
More information about the NANOG
mailing list