New Template.gate form available on nis.nsf.net
bsb
bsb
Fri May 22 13:18:23 UTC 1992
Regional-techs,
Greetings. There is a spiffy new template.gate form appended
below for your convenience. It is available on nis.nsf.net
via anonymous ftp in the nsfnet/announced.networks directory.
It is dated May 22, 1992 (version 3.2) and erases some of
the ambiguity of the previous version while maintaining the
old esoteric lameness.
Enjoy!
-B. Sue Blair
Merit / NSFNET
---------------
[nis.nsf.net:nsfnet/announced.networks/template.gate]
Version 3.2 22 May 1992
NSFNET Configuration Request Template
for the NSFNET policy-based routing data base
---- EGP/BGP Peer Change Request ----
This template is to request announcement of EGP/BGP peers to the NSFNET
backbone.
Configuration requests may only be submitted by the designated routing
contacts for the Autonomous Systems of the NSFNET.
Configuration requests should be submitted to nsfnet-admin at merit.edu.
Please read the explanation at the bottom of this form if you are
unfamiliar with its contents.
--------------------------------- CUT HERE -----------------------------------
---- EGP/BGP Peer Change Request ----
Router Internet Address:
Router Internet Name:
Router AS Number:
Is this a new AS (y/n):
(If so, please fill out a template.as form as well)
ENSS and/or NSS number colocated with router:
Router physical location (if different than ENSS/NSS):
Should BGP1, BGP2, or EGP be used:
For BGP1 only: linktype H or D:
EGP metric out (T1 default=128 / T3 default=127):
BGP metric out (T1 default=128 / T3 default=127):
Router Type/Manufacturer:
Software Version:
Addition, Deletion or Change?(A/D/C):
Additional Comments (optional):
--------------------------------- CUT HERE -----------------------------------
*****************************************************************************
EXAMPLE:
Suppose a New Cisco HyBridge with the Internet address 35.1.1.125 and the
domain name NSFNET-GW.MERIT.EDU should be co-located with NSS 17 (Ann
Arbor), running BGP as using the Autonomous System number 233. It should
not receive routing information from the DDN/MILNET (AS 164 and AS 184)
and its own routed should not be advertised into AS 177.
Their EGP/BGP peer change request would be filled in as follows:
---- EGP/BGP Peer Change Request ----
Router Internet Address: 35.1.1.125
Router Internet Name: NSFNET-GW.MERIT.EDU
Router AS Number: 233
Is this a new AS (y/n): n
ENSS and/or NSS number colocated with router: NSS17
Router physical location (if different than ENSS/NSS):
Should BGP1, BGP2, or EGP be used: BGP1
For BGP1 only: linktype D or H: H
EGP metric out (T1 default=128 / T3 default=127):
BGP metric out (T1 default=128 / T3 default=127):
Router Type/Manufacturer: Cisco HyBridge
Software version: 8.1
Addition, Deletion or Change?(A/D/C): A
Additional Comments (optional):
-----------------------------------------------------------
Configurations installations are performed Tuesday and Friday morning
from 05:00-08:00 Eastern time, so some instability on the backbones
may be experienced during this window.
Requests for the Tuesday morning config window should be submitted to
nsfnet-admin by noon Monday. Requests for the Friday morning config
window should be submitted by noon Thursday.
To get a current listing of nodes and node numbers on the T1 and T3
backbone, you can anonymous ftp to nis.nsf.net, cd to /nsfnet/
announced.networks and get the file handy.node.list.
More information about the NANOG
mailing list