Unimus Network Automation https://unimus.net/

Wed Jan 13 15:29:20 UTC 2021

We’ve been using it for about a year, mostly for Cisco, but it also is one of the few commercial products that can back up Sonicwall firewalls. The design is well considered, with minimal chattiness in daily reports, so unexpected changes are quite apparent.

 -mel beckman

On Jan 13, 2021, at 6:54 AM, Mike Hammett <nanog at ics-il.net> wrote:

*nods* I have used it on RouterOS, ExtremeWare, ExtremeXOS, Cisco-Nexus, Cisco-IOS, Foundry, Brocade, UniFi, AirOS (AirFiber and AirMax), and likely some others I've forgotten.

-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com

Midwest-IX
http://www.midwest-ix.com

________________________________
From: "Josh Luthman" <josh at imaginenetworksllc.com>
To: "Jason Kuehl" <jason.w.kuehl at gmail.com>
Cc: "Mike Hammett" <nanog at ics-il.net>, "NANOG" <nanog at nanog.org>
Sent: Wednesday, January 13, 2021 8:46:35 AM
Subject: Re: Unimus Network Automation https://unimus.net/

I've been using Unimus for almost as long as Mike.  Met Tomas at a show in Vegas, very smart guy.

I use it exclusively for Mikrotik but I can safely assume if they made it work with Mikrotik there would be no problem on Cisco/Juniper (more uniform).

Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Wed, Jan 13, 2021 at 8:49 AM Jason Kuehl <jason.w.kuehl at gmail.com<mailto:jason.w.kuehl at gmail.com>> wrote:
Sorry, RANCID is open source.  rConfig  is not.

On Wed, Jan 13, 2021 at 8:46 AM Jason Kuehl <jason.w.kuehl at gmail.com<mailto:jason.w.kuehl at gmail.com>> wrote:
unimus is great I've used it for simple sites. rConfig is better as there is no licensing and open source. It's more involved at setting up but worth it.

On Wed, Jan 13, 2021 at 8:20 AM Mike Hammett <nanog at ics-il.net<mailto:nanog at ics-il.net>> wrote:
I've been using Unimus since before 0.3.0 (as I see it contains a number of additions I would have contributed).

Great product.

They are very responsive to feature requests.

They have been very responsive to the few support requests I've had.

Very cost effective.

Very easy to install and update.

-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com

Midwest-IX
http://www.midwest-ix.com

________________________________
From: "James Braunegg" <james.braunegg at micron21.com<mailto:james.braunegg at micron21.com>>
To: nanog at nanog.org<mailto:nanog at nanog.org>
Sent: Wednesday, January 13, 2021 12:38:53 AM
Subject: Unimus Network Automation https://unimus.net/

Dear All

Anyone using Unimus for Network Automation ? https://unimus.net/

i.e. mass configuration / push / pull configurations looking for something more powerful than rconfig for a Cisco Nexus and Juniper environment.

And or happy with any other suggestions

Kindest Regards

James Braunegg
[cid:image001.png at 01D280A4.01865B60]
1300 769 972<tel:1300%20769%20972> / 0488 997 207<tel:1300%20769%20972>
james at micron21.com<mailto:james at micron21.com>
www.micron21.com/<http://www.micron21.com/>
[cid:image002.png at 01D280A4.01865B60]<http://www.micron21.com/>
[cid:image003.png at 01D280A4.01865B60]<https://www.facebook.com/micron21/>
[cid:image004.png at 01D280A4.01865B60]<https://twitter.com/micron21>
Follow us on Twitter<https://twitter.com/micron21> for important service and system updates.
This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer.

--
Sincerely,

Jason W Kuehl
Cell 920-419-8983
jason.w.kuehl at gmail.com<mailto:jason.w.kuehl at gmail.com>

--
Sincerely,

Jason W Kuehl
Cell 920-419-8983
jason.w.kuehl at gmail.com<mailto:jason.w.kuehl at gmail.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20210113/08850748/attachment.html>