Switch for SFP+

Thu May 14 19:36:24 UTC 2020

https://mikrotik.com/product/crs312_4c_8xg_rm

Regards,

Nathan Babcock
President - Straight Shot Wireless

O: 575-208-7915

 <http://www.sswireless.net/> 

From: NANOG <nanog-bounces at nanog.org> On Behalf Of Mauro Gasparini
Sent: Thursday, May 14, 2020 7:46 AM
To: Mehmet Akcin <mehmet at akcin.net>
Cc: nanog <nanog at nanog.org>
Subject: Re: Switch for SFP+

Thank you. The problem is that to get a price lower than U$D 3000 I have to resort to a used device.

El 14/5/20 a las 01:08, Mehmet Akcin escribió:

Used Juniper QFX5100-48T will do it. Probably overkill but you can grab one cheap @ebay

On Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini at gmail.com <mailto:mjgasparini at gmail.com> > wrote:

Good afternoon.

I'm looking for a switch with the following capabilities:
. transport for more than 20 gbps
. link aggregation LACP
. slots for SFP+
. seamlessly when trunking vlans through the link aggregation.

And essentially that doesn't exceed US$D 2000 and is compatible with 
10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor itself 
(e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs).

If any of you have a good experience with a device that meets these 
requirements (which are minimal with the exception of price and 
compatibility) ?

Regards.
Mauro Gasparini

-- 

Mehmet
+1-424-298-1903

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200514/53919d36/attachment.html>