Patch panel solutions for 4x10GE breakout

Mon May 9 19:49:20 UTC 2016

The Corning Edge stuff is nice.  Very modular, so you can customize it for
your needs.  And from my experience, it's proven to be designed well.
Makes it easy to slide individual trays out to work on.  And the built in
shutters on the LC connectors instead of the dust caps are a nice touch,
since no one remembers to put the dust caps back.

On Thu, May 5, 2016 at 7:59 AM, Shawn Morris <shawn at smorris.com> wrote:

> It's the Corning Edge8 line [
>
> https://www.corning.com/worldwide/en/products/communication-networks/applications/data-center/edge8.html
> ]
>
> On Thu, May 5, 2016 at 9:45 AM, Jared Mauch <jared at puck.nether.net> wrote:
>
> > There is a nice Corning panel our facilities team is using now. I can
> find
> > the link and send it to the list when not at my phone.
> >
> > Jared Mauch
> >
> > > On May 5, 2016, at 10:28 AM, Phil Bedard <bedard.phil at gmail.com>
> wrote:
> > >
> > > So the newer equipment we are looking at uses QSFP+/MTP with 4x10GE
> > breakouts to deliver 10G.  We are not wiring these up to things in the
> same
> > rack, they will be going to patch panels and then elsewhere in a
> facility.
> > It could potentially get messy with the panels we have today so we are
> > looking at other solutions.  These are all SM LR connections using LC.
> > There are a lot of SM MTP to LC options since that’s the way most panels
> > are wired, but they typically have 6 duplex LC connectors per MTP and
> not 4
> > which isn’t very efficient in this use case.  I’ve seen others just use
> an
> > intermediate LC to LC panel and just wire the breakouts to those and then
> > jumper the other side elsewhere.
> > >
> > > Anything else others have used?  The point of the solution is to keep
> > the wiring mess in front of or near the device to a minimum.
> > >
> > > Thanks,
> > >
> > > Phil
> > >
> >
> >
>

-- 
perl -e 's++=END;++y(;-P)}\n?k++=;<+xru}?print:??;'