10G-capable customer router recommendations?
mike.lyon at gmail.com
mike.lyon at gmail.com
Fri Apr 15 22:01:16 UTC 2016
Check out the Mikrotik Cloud Core routers, they make them with SFP+ support now. I have one of them with 10g deployed right now.
-Mike
> On Apr 15, 2016, at 14:52, Aaron <aaron at wholesaleinternet.net> wrote:
>
> Not a lot of 10G capable CPEs out there. For our 10G residential customers we install Brocade ICXs.
>
> Aaron
>
>
>> On 4/15/2016 3:18 PM, David Sotnick wrote:
>> Hello masters of the Internet,
>>
>> I was recently asked to set up networking at a VIP's home where he has
>> Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a
>> Comcast-supplied Juniper ACX-2100 router.
>>
>> Which customer router would you suggest for such a setup? It needs to do
>> IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also
>> supports IPv6).
>>
>> The customer pays for "2Gb" service (Comcast caps this at 2G+10% = 2.2Gbps)
>> and would like to get what he pays for (*cough*) by having the ability to
>> stream two 1Gbps streams (or at least achieve > 1.0Gbps).
>>
>> I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to the
>> customer switch, or replace the AV-integrator-installed Cisco SG300-52P
>> (Cisco switch with e.g. an EX-3300 with 10Gb uplinks).
>>
>> Thanks in advance for your suggestions.
>>
>> -Dave
>
> --
> ================================================================
> Aaron Wendel
> Chief Technical Officer
> Wholesale Internet, Inc. (AS 32097)
> (816)550-9030
> http://www.wholesaleinternet.com
> ================================================================
>
More information about the NANOG
mailing list