NetFlow - path from Routers to Collector

Todd K Grand tgrand at tgrand.com
Thu Sep 10 20:29:21 UTC 2015


Mikrotik router-boards can be used as a serial to IP converter.
Complete with rip, ospf, bgp, etc.

-----Original Message----- 
From: White, Andrew
Sent: Thursday, September 10, 2015 10:33 AM
To: Frank Bulk ; 'Roland Dobbins' ; nanog at nanog.org
Subject: RE: NetFlow - path from Routers to Collector

$50 on ebay

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR12.TRC2.A0.H0.Xconsole+server.TRS0&_nkw=console+server&_sacat=0

Andrew White
Desk:  314.394-9594  | Cell:  314.308-7730
NetOps Consultant, DAS DNS group
Charter Communications
12405 Powerscourt Drive  St. Louis,  MO 63131


-----Original Message-----
From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Frank Bulk
Sent: Thursday, September 10, 2015 9:37 AM
To: 'Roland Dobbins'; nanog at nanog.org
Subject: RE: NetFlow - path from Routers to Collector

Does anyone else have a serial to IP dongle for devices that are IP only?
That dongle would need to have telnet and SSH support.  Or an IP-to-IP 
dongle, that would support a routing table?  There's Brocade kit that has a 
mgmt. port, but it doesn't have its own routing table (they now have a mgmt.
vrf in some software releases), making it local-only or something you have 
to use some kind of pseudo-NAT (all public IPs are translated to 
mgmt-network IPs).

Frank

-----Original Message-----
From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Roland Dobbins
Sent: Tuesday, September 01, 2015 6:23 PM
To: nanog at nanog.org
Subject: Re: NetFlow - path from Routers to Collector

<snip>

Absolutely.  All kinds of creative lashups to get console access in 
difficult situations (and, as you noted previously, an increasing number of 
devices don't support serial console at all, which is highly annoying).

-----------------------------------
Roland Dobbins <rdobbins at arbor.net>




More information about the NANOG mailing list