Recommended 10GE ISCSI SAN switch

Lumir Srchlm srchlm at its.cz
Tue May 12 15:25:52 UTC 2015


We use IBM / Lenovo switches for such traffic. Very low latency, rear to 
front or front to rear airflow models, large buffers, FCoE, OpenFlow 
support, great price-performance...

G8124E or G8272 may be the right models, use DAC cables instead of SFP+ if 
possible.

Lumir






From:   "Paul S." <contact at winterei.se>
To:     "nanog at nanog.org" <nanog at nanog.org>
Date:   12.05.2015 15:39
Subject:        Recommended 10GE ISCSI SAN switch
Sent by:        "NANOG" <nanog-bounces at nanog.org>



Hi guys,

We're shortly going to be getting some 10G SANs, and I was wondering 
what people were using as SAN switches for 10G SANs.

It is my understanding that low buffer sizes make most 'normal' 10G 
ethernet switches unsuitable for the job.

We're pretty much an exclusive Juniper shop, but are not biased in any 
way -- best tool for the job is what I've been tasked with to find.

Keeping that in mind, how would something like a EX4550 fare in the 
role? Are there better devices in the same price range?

Thanks!





Obsah této zprávy, stejně jako obsah související osobní a telefonické 
komunikace zástupců a zaměstnanců společnosti ITS slouží výlučně jako 
prostředek k výměně informací a, není-li to v nich výslovně uvedeno, 
nejsou právním jednáním zakládajícím závaznou nabídku, vznik, změnu nebo 
zánik práv či právních následků anebo jednáním směřujícím bezprostředně k 
uzavření smlouvy a společnost ITS nenese jakoukoliv odpovědnost za 
důsledky či újmu vzniklou neuzavřením smlouvy.


More information about the NANOG mailing list