stacking pdu

Eric Tykwinski eric-list at truenet.com
Fri Jun 5 21:31:15 UTC 2015


I was pretty much thinking the same, get a switched/metered outlet PDU.  APC, ServerTech, et al have them, then daisy chain something like a Dell AP6015 off the outlet.  No clue about NEC/local laws, but the Dells are pretty much setup for that type of setup.

> On Jun 5, 2015, at 5:20 PM, Brian Loveland <brian at bloveland.com> wrote:
> 
> APC does make some 'half rack' PDU's that take a C20 inlet so they could
> hang off a C19 outlet on another PDU:
> http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP8858&displayList=ALL&page_type=displaybasic&printer_friendly=yes
> http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP7821&displayList=ALL&page_type=displaybasic&printer_friendly=yes
> 
> On the software side, just use a "master" PDU with metering.  These "sub"
> ones are also metered but you would want to look at the total utilization
> on the "master".
> 
> No comment if its to code...
> 
> On Fri, Jun 5, 2015 at 12:51 AM, shawn wilson <ag4ve.us at gmail.com> wrote:
> 
>> Well, I was kinda thinking this would turn out to be a dumb question / have
>> an obvious answer. Apparently not. But it seems I can't go buy a solution
>> either. I guess there isn't much of a market (though I am just talking
>> software - maybe someone could make an update :) ).
>> 





More information about the NANOG mailing list