100Gb/s TOR switch

Phil Bedard bedard.phil at gmail.com
Thu Apr 9 02:33:06 UTC 2015


Everyone.  These should also support 25/50G Ethernet. 

Phil

-----Original Message-----
From: "Colton Conor" <colton.conor at gmail.com>
Sent: ‎4/‎8/‎2015 10:01 PM
To: "Furst, John-Nicholas" <jofurst at akamai.com>
Cc: "nanog at nanog.org" <nanog at nanog.org>
Subject: Re: 100Gb/s TOR switch

>From which vendors?

On Wed, Apr 8, 2015 at 2:43 PM, Furst, John-Nicholas <jofurst at akamai.com>
wrote:

> If you can wait, you will see the market flooded with 32x100G with the
> ability to down-clock to 40g / breakout to 4x10g in the Q3/Q4 timeframe ;)
>
>
> John-Nicholas Furst
> Hardware Engineer
>
>
> Office: +1.617.274.7212
> Akamai Technologies
> 150 Broadway
> Cambridge, MA 02142
>
>
>
>
> On 4/8/15, 3:37 PM, "Hockett, Roy" <royboy at umich.edu> wrote:
>
> >I did see these switches at SC14.
> >
> >http://www.corsa.com/products/dp6440/
> >
> >Thanks,
> >-Roy Hockett
> >
> >Network Architect,
> >ITS Communications Systems and Data Centers
> >University of Michigan
> >Tel: (734) 763-7325
> >Fax: (734) 615-1727
> >email: royboy at umich.edu
> >
> >On Apr 8, 2015, at 3:01 PM, Piotr <piotr.1234 at interia.pl> wrote:
> >
> >> Hi,
> >>
> >> There is something like this on market ? Looking for standalone switch,
> >>1/2U, ca 40 ports 10Gb/s and about 4 ports 100Gb/s fixed or as a module.
> >>
> >> regards,
> >> Peter
> >
>
>



More information about the NANOG mailing list