Cross connecting two routers with channelized interfaces
Faisal Imtiaz
faisal at snappydsl.net
Wed May 16 12:23:11 UTC 2012
Yes, u will have to connect the fibers in a cross manner..and setup one side to generate the clock..
Faisal
On May 16, 2012, at 8:09 AM, Diogo Montagner <diogo.montagner at gmail.com> wrote:
> Hello,
>
> sorry for this dumb question.
>
> Is it possible to connect two routers like below ?
>
> RouterA/cstm1 ---- dark fiber ---- cstm1/RouterB
>
> The interfaces used in this case are channelized STM1 in both sides.
> Between RouterA and RouterB I would like to create many low-speed
> interfaces ranging from 64Kbps up to 2Mbps. Between these two routers
> there is no MUX.
>
> The framing mode has to be SDH.
>
> Thanks in advance!
>
> Diogo
>
>
More information about the NANOG
mailing list