Juniper MX960 Mqchip packet lenght error

Tue Nov 8 14:34:36 UTC 2011

Hi all,

After upgrading Juniper MX960 from 4x10Gbe DPCE to 16x10Gbe MPC, I see strange log messages like this:

Fpc10 MQCHIP(0) LI Packet length error, pt entry 22

Seems to be only a "cosmetic" message, but today my team found some traffic dropped on interface on this card (before we only request check about log message).
Has anyone the same problem?

My software release is Junos 10.3R3.7.

Thanks in advance.

Antonio Ferretti
Network Engineer
Telecom Italia Sparkle
Backbone IP&Data Operations
Seabone 2nd Level Support
Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie.

This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks.

[cid:00000000000000000000000000000001 at TI.Disclaimer]Rispetta l'ambiente. Non stampare questa mail se non ? necessario.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: logo Ambiente_foglia.jpg
Type: image/jpeg
Size: 677 bytes
Desc: logo Ambiente_foglia.jpg
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20111108/7eb36bcc/attachment.jpg>