IPv6 mistakes, was: Re: Looking for an IPv6 naysayer...

Frank Bulk frnkblk at iname.com
Sun Feb 13 22:44:40 UTC 2011


Fine approach as long as the DSLAMs and CPE allow ether type 0x86DD to pass.

Frank

-----Original Message-----
From: Jack Bates [mailto:jbates at brightok.net] 
Sent: Friday, February 11, 2011 4:01 PM
To: Ricky Beam
Cc: nanog at nanog.org
Subject: Re: IPv6 mistakes, was: Re: Looking for an IPv6 naysayer...

On 2/11/2011 3:41 PM, Ricky Beam wrote:
> In bridge mode, any modem will do.  It's when the modem is also the
> router (which is most cases today) that it will need attention to
> support IPv6. (in bridge mode, you'll have to fix whatever it's plugged
> into, but that's the customer's problem... off to Best Buy for an IPv6
> capable D-Link.)

I just finished discussing with the one telco in my network that 
deployed PPPoE. All customers will bring their modem into the office, 
where the front desk ladies will flash the config to bridge mode. It was 
that or replace thousands of CPE that never will support IPv6 in routed 
mode.

Have a nice day.



Jack






More information about the NANOG mailing list