Nexus emulation? Anyone?

David Sinn dsinn at dsinn.com
Tue Dec 20 18:19:02 UTC 2011


I don't think anyone is asking for a full simulation of the platform in software, that is how the actual ASIC's operate.  That is probably best for an entirely different conversation.

But there is huge need to simulate the control-plane functionally with a basic forwarding ability (not performant, but pass packets correctly such that you can verify the topology).  This is something Dyanmips does great in emulating a cluster of 7200's and allows operators to validate topologies and planned changes in mainstream IOS platforms.  Having that for NX-OS would increase the adoption and confidence in the platform.  VM's on multiple boxes make simulating a whole network of a given platform simple and easy.

From the outside Cisco continues to miss the need for this.  At least some of the other vendors are picking up how helpful this and are reacting positively to it.

David

<I've been ranting about this to my account team and Nexus management for a while now, so sorry if this is a duplicate you've already seen.>

On Dec 20, 2011, at 10:03 AM, Tim Stevenson wrote:

> You couldn't use Titanium to judge/discuss the nexus family as a whole either. Aside from 1KV, all the nexus products use ASIC hardware specific to that platform/linecard and no NXOS software emulator exists that mimics those behaviors.
> 
> 2 cents,
> Tim
> 
> At 09:34 AM 12/20/2011, Luan Nguyen gushed:
> 
>> You can't use the software switch Nexus 1000V to judge/discuss the Nexus
>> family products N7K, N5K...etc as a whole?
>> 
>> Check out this discussion
>> <https://supportforums.cisco.com/thread/2054884>https://supportforums.cisco.com/thread/2054884
>> 
>> Titanium as they call the NX-OS simulator is not available to the public
>> though...
>> 
>> -Luan
>> 
>> On Tue, Dec 20, 2011 at 12:08 PM, -Hammer- <bhmccie at gmail.com> wrote:
>> 
>> > Bah. Look like I need more of an education on Nexus in general. Thanks for
>> > the easy pointer.
>> >
>> >
>> > -Hammer-
>> >
>> > "I was a normal American nerd"
>> > -Jack Herer
>> >
>> >
>> >
>> > On 12/20/2011 11:02 AM, Nick Hilliard wrote:
>> >
>> >> On 20/12/2011 13:55, -Hammer- wrote:
>> >>
>> >>
>> >>> I know we can't throw NX code on Dynamips but I figured I would ask the
>> >>> group anyway. We are starting to discuss Nexus platform options and I can
>> >>> only get so much from demo depot before our AM gets whiny. Is anyone
>> >>> currently emulating Nexus on anything that is open to the public?
>> >>>
>> >>>
>> >> nexus1k?
>> >>
>> >> Nick
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
> 
> 
> 
> 
> Tim Stevenson, tstevens at cisco.com
> Routing & Switching CCIE #5561
> Distinguished Technical Marketing Engineer, Cisco Nexus 7000
> Cisco - http://www.cisco.com
> IP Phone: 408-526-6759
> ********************************************************
> The contents of this message may be *Cisco Confidential*
> and are intended for the specified recipients only.
> 
> 





More information about the NANOG mailing list