eigrp set next hop

Tue Apr 19 02:43:23 UTC 2011

How many bgp prefixes do you have? Can you just put statics on router 2?

On Apr 18, 2011, at 8:26 PM, "David Swafford" <david at davidswafford.com> wrote:

> What's the real goal behind this?  What your describing sounds like a
> horrible band-aid....
> 
> David.
> 
> On Mon, Apr 18, 2011 at 5:08 PM, Andrey Khomyakov <
> khomyakov.andrey at gmail.com> wrote:
> 
>> Hi nanog
>> 
>> I need to advertise EIGRP route with a different next-hop value than self
>> 
>> Due to how the connections are setup, I have to run BGP between two peers
>> that are 3 hops away from each other.
>> 
>> router1--router2--firewall--router3
>> I'm running EBGP between router1 and router3
>> router1 is redistributing into EIGRP that's running with router2
>> 
>> The problem is that now router2 thinks that router3 routes are reachable
>> via
>> router1 so I have myself a route loop.
>> 
>> Is there a way to advertise an EIGRP route with next hop of router3 (or
>> firewall for that matter) rather than router1 which is what EIGRP does by
>> default
>> 
>> Thank you in advance for advice.
>> 
>> --
>> Andrey Khomyakov
>> [khomyakov.andrey at gmail.com]
>> 

Confidentiality Notice: This e-mail message (including any attached or
embedded documents) is intended for the exclusive and confidential use of the
individual or entity to which this message is addressed, and unless otherwise
expressly indicated, is confidential and privileged information of Rackspace.
Any dissemination, distribution or copying of the enclosed material is prohibited.
If you receive this transmission in error, please notify us immediately by e-mail
at abuse at rackspace.com, and delete the original message.
Your cooperation is appreciated.