<NAT translation from a sourced network to a destination network>
Michael Holstein
michael.holstein at csuohio.edu
Fri Jun 18 20:34:23 UTC 2010
> 192.168.1.10 à NAT à10.0.1.10 à route that packet to 10.0.1.1.
>
>
>
> I only want specific host to route to that specific /27 network .
>
Cisco's route-map can do this (policy based routing .. define an ACL to
match and then route accordingly) :
https://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml
Cheers,
Michael Holstein
Cleveland State University
More information about the NANOG
mailing list