SMS
William Herrin
herrin-nanog at dirtside.com
Tue Sep 22 16:29:13 UTC 2009
On Tue, Sep 22, 2009 at 11:59 AM, Scott Berkman <scott at sberkman.net> wrote:
> Some people use a serial interface to a specific model cell phones to
> directly send the message over the carrier's cellular network. This is good
> in the event of isolation of a location from any IP connectivity to a
> carrier gateway.
The Multitech Multimodem GPRS model MTCBA-G-EN-F4 has an ethernet
port. Add a SIM card from your favorite wireless carrier and you can
send and receive SMS messages via "AT" commands over a TCP socket.
Problem is, it seizes up or otherwise founders every few weeks and has
to be power cycled.
Has anyone heard of other products with a good reliability record?
> I believe there was another solution that involved direct carrier
> connections, but these are most likely cost prohibitive in most situations.
Any pointers on this would be greatly appreciated. I have a need for
geographically redundant access to the same phone numbers in order to
send and receive SMS messages. Even if I have to buy a pair of T1s
that are 99.9% idle, it'd be worth it.
Regards,
Bill Herrin
--
William D. Herrin ................ herrin at dirtside.com bill at herrin.us
3005 Crane Dr. ...................... Web: <http://bill.herrin.us/>
Falls Church, VA 22042-3004
More information about the NANOG
mailing list